4
4.0
Mar 17, 2021
03/21
by
Ha Nguyen (Haiang)
data
eye 4
favorite 0
comment 0
Hiện tại tôi đang hoàn thiện nốt phần Thiết kế dành cho máy in Delta. Đây là Part gắn Step trên và dưới áp dụng cho Step 42, nema 17, dành cho máy in 3D các tập tin hoàn thiện tôi sẽ gửi lên sớm nhất. Các part trên và dưới tôi đã sửa đổi lại giúp cho việc gắn Step dễ dàng hơn phiên bản này tôi sẽ áp dụng cho 2 hình thức chạy ray trượt và chạy dây đai. Kênh Youtube chính thức của tôi....
Topics: 3d printer, 3D Printer Accessories, stl, thingiverse, delta printer
9
9.0
Apr 30, 2021
04/21
by
David Dinius (Dinster)
data
eye 9
favorite 0
comment 0
Part is used as the top termination for the Aurora A3 printer. Dimensions are made to link up to Claghorn's open cable chain links: http://www.thingiverse.com/thing:611593
Topics: stl, Aurora, 3d_printer, 3D Printer Accessories, thingiverse, printer
6
6.0
Jan 17, 2021
01/21
by
mythi Saint (saintmythi)
data
eye 6
favorite 0
comment 0
Here is a power-board standoff for the Anet A8 so you don't have to use the stock white standoffs. stock 14mm long print 4 please enjoy If you enjoy my models please follow me to keep up with all the new models i post. My models take a lot of time and work to make. please consider supporting my work on Patreon https://www.patreon.com/saintmythi
Topics: A8 reprap, 3D Printer Parts, A8 printer, printer_parts, Anet_A8, 3d printer, thingiverse,...
8
8.0
Apr 21, 2021
04/21
by
(Thump2010)
data
eye 8
favorite 0
comment 0
My work picked up a Malyan M180 and the spool holders were not big enough around. I designed these to fit the spools I use but being the same height as the originals and designed to used the bearings from the original holders. Added a 58 mm version
Topics: thingiverse, 3D Printer Parts, 3d_printer, stl, printer_parts
8
8.0
Apr 23, 2021
04/21
by
Marvin Jean (CrimsoRo)
data
eye 8
favorite 0
comment 0
I have yet to finish the other axis, tell me what you think of this design.
Topics: Cherry_printer, 3D Printer Parts, stl, 3d_printer, thingiverse
10
10.0
Oct 12, 2020
10/20
by
Center for Accessible Technology in Sign
movies
eye 10
favorite 0
comment 0
ASL vocabulary
Topic: printer
2
2.0
Mar 13, 2021
03/21
by
Matt Peavy (Mapeavy)
data
eye 2
favorite 0
comment 0
This is a foot for a Monoprice Mini Delta. It helps to increase airflow under the printer. It also helps to reduce the volume of the fan.
Topics: 3d_printer, 3D Printer Accessories, thingiverse, 3D_printer_foot, Monoprice_mini_delta,...
0
0.0
Apr 19, 2022
04/22
by
Tyler Koney (Itz_Earthy)
data
eye 0
favorite 0
comment 0
It's a Hat for your printer! Should work on most printers. It just clips around the wires and Bowden tube. I added Googly eyes to my printer to have more fun. I hope these are fun and that you enjoy them. I didn't have yellow filament so I tried painting the helmet This project is a work in progress. If you want more hats or have a hat fixed please let me know.
Topics: thingiverse, fun, 3D_Printer_Parts, hat, printer_calibration, 3D Printer Accessories, cowboy, cute,...
7
7.0
Jun 21, 2021
06/21
by
Aidan fox (thewerefox)
data
eye 7
favorite 0
comment 0
Here is my custom design for connecting the luu8 slides and 10mm 1mm pitch leadscrew with a baseplate using 20mm t slot extrusions. I created these extrusions and added them into the print for an even quicker connection when building the printer.
Topics: advanced, printer, 3D_Printer_Parts, SLA, thingiverse, stl, 3d_printer, dlp, DLP_SLA, dlp_printer,...
1
1.0
Jan 18, 2022
01/22
by
Guillaume VANNSON (GuillaumeV)
data
eye 1
favorite 0
comment 0
Delta 3D printer
Topics: 3d_printer, delta_printer, printer, Models, thingiverse, delta, stl
3
3.0
Feb 26, 2021
02/21
by
Epson
software
eye 3
favorite 0
comment 0
This is the original, unmodified capture of the driver software support disc that came with my Epson Picture PM-225. Which the ISO in contained within the ISO. Note: Only the Windows version could be captured, as the author deos not have a Mac to capture the macOS version, contained on the disc. The ISO contains: Printer manual (which the software links to) Windows Driver software Epson Easy Photo Print Epson CreativeZone Software is intended to work with Windows XP to Windows 8
Topics: Epson, Printer Software, Printer Driver, Drivers, Printers, Printer Manual
2
2.0
Apr 1, 2021
04/21
by
Kirill Stuk (Stukinator)
data
eye 2
favorite 0
comment 0
One more M3 knob nut for table corners leveling. I attached CAD files so you can customize it.
Topics: 3D_Printer_Parts, thingiverse, nut, 3D Printer Accessories, 3d_printer, knob, printer_table, stl
1
1.0
Dec 14, 2021
12/21
by
Unai Domínguez Martín (unai8997-ivft)
data
eye 1
favorite 0
comment 0
Espaciador de la tapa inferior de la impresora, para meter o sacar cables, refrigerar mejor, etc.
Topics: stl, 3d_printer, thingiverse, twotreesbluer, 3D_Printer_Parts, twotrees_3d_printer, 3D Printer...
1
1.0
Aug 8, 2021
08/21
by
joseph michael (jmichael3)
data
eye 1
favorite 0
comment 0
I made this 3D Printer Handle for my new Anycubic Vyper. I wanted it to look more like the Creality CR-6. I uploaded two STL files, one blank handle and one with the words "VYPER" on it. All you need is two spare bolts and 2 spare t-nuts to install. Best if printed laying flat on the build plate. Hope you enjoy!
Topics: 3D_Printer_Parts, thingiverse, 3d_printer, 3D Printer Accessories, printer_handle,...
5
5.0
Jan 21, 2021
01/21
by
William Tortorello (quadcells)
data
eye 5
favorite 0
comment 0
Came across LVLASIAN's awesome CR-10 Anti Vibration Feet.But I have a Delta and a large one so I modified LVLASIAN design to fit my needs and hope it helps others too. I used these anti vibration pads to go in the 3D printer feet: https://www.amazon.com/gp/product/B00BVEMLR4/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Topics: 3D Printer Parts, 3D Printer, thingiverse, printer_feet, 3D Delt Printer, anti_vibration,...
6
6.0
Jun 20, 2021
06/21
by
nicola la mattina (Nicosoft)
data
eye 6
favorite 0
comment 0
version 1.0
Topics: 3D_Printer_Parts, thingiverse, 3D Printer Accessories, stl, 3d_printer
6
6.0
Jan 20, 2021
01/21
by
craig bigelow (The_Great_Bigglesworth)
data
eye 6
favorite 0
comment 0
This is a prototype bowden conversion consisting of support brackets for a ctc printer using a RepRap-3D-Printer-Dual-Input-Dual-Nozzle-Bowden-Extruder-Hot-End-0-4mm-1-75mm. The overall design puts the nozzle slightly off of the bed envelope and it needs to be offset by about cm towards the back of the machine. Other than that it is a bolt on.
Topics: 3D Printer Accessories, thingiverse, CTC_3D_Printer, ctc_printer, stl
3
3.0
Apr 13, 2021
04/21
by
Manuel Borrajo (BorrajosPower)
data
eye 3
favorite 0
comment 0
Varillas lisas de 12mm Extrusor: http://airtripper.com/1071/airtrippers-bowden-extruder-v3-updated-design/
Topics: thingiverse, 3D Printers, 3d_printer, delta_printer, printer, stl, delta
2
2.0
Mar 26, 2021
03/21
by
Ümit AKIN (umitakin)
data
eye 2
favorite 0
comment 0
Kendi tasarımım olan Corexy CNC, Lazer kesici ve 3D printer uygulaması tüm parçalar çizilip, 3D printerda basılıp, montajı yapılmıştır. bitmiş hali :https://youtu.be/ECfEixlcilo
Topics: stl, 3d_printer, corexy, thingiverse, CoreXY_Printer, 3D Printer Accessories
8
8.0
Apr 30, 2021
04/21
by
Frank Willems (willefg)
data
eye 8
favorite 0
comment 0
After using the Spring based anti-vibartion feet for a while I wasn't too pleased with the result. To my opinion using the springs the machine is rather instable and shakes all the time especially when the head makes short movements. I think that because of the springs this "shaking energy" stays in the machine rather than being transferred away from the machine. For this reason I created my own feet that raises the machine 30 mm and has a larger support area for the machine. I've...
Topics: stl, printer_feet, 3D Printer Parts, thingiverse, CTC_3D_Printer
3
3.0
Apr 15, 2021
04/21
by
Philipp Schlager (superlegasteniker)
data
eye 3
favorite 0
comment 0
this holds the pulley for the x-belt. in the original design, witch the rods where only stucked in, was most of the tension directed over the z-bearings, z-rods and frame. this presses directly onto the x-rods, witch have a blind-hole on the other end. 'connectet by shape' rather than '- - force' ² originaly it was desinged fro a selfprinted pulley³ on 2 HDD-bearings. i went back to the 4mm rimmed bearings, so i had to file .3mm of of the contact area. if you also need 8mm, but dont want to...
Topics: 3D_Printer_Parts, 3D Printer Parts, thingiverse, stl, 3d_printer
9
9.0
Jan 9, 2021
01/21
by
Alex Tim (aruba68)
data
eye 9
favorite 0
comment 0
AM CTC Drucker sind hinten 2 große Löcher für die Filamentrollen. Hier der passende Deckel zum verschließen.
Topics: thingiverse, CTC_3D_Printer, 3D Printer Accessories, stl, ctc_printer
1
1.0
Jan 5, 2021
01/21
by
Michael Vieau (mvieau)
data
eye 1
favorite 0
comment 0
I don't like looking at the dirt and debris that collects in the rails on my 3D printer so I decided to create a small insert to help keep them clean. Since I was printing them, I thought it would be fun to make them out of color filament to make the printer color coordinated. These should fit any standard printer rails. Just adjust the length to what you need. I hope you find this useful.
Topics: printer_accessories, stl, accessories, 3d_printer, thingiverse, 3D Printer Accessories
8
8.0
Apr 27, 2021
04/21
by
Bernard Bout (bernbout)
data
eye 8
favorite 0
comment 0
This is a Cable chain for the Y axis of my printer. Zoom in on the photo attached to see details. I drilled a hole in the Centre a while back as I use 3 screws to level my bed rather than the 4 as it came with. This 3 screw leveling is much easier to get the bed level than 4. The bracket is designed to fit for that hole. The other end is designed to be fixed to the pre drilled holes that are used to support the Y axis motor. The model bbCableChain_angle2.stl should be fixed first to the bottom...
Topics: thingiverse, 3d_printer, 3D_Printer_Parts, stl, 3D Printer Accessories
6
6.0
Jan 17, 2021
01/21
by
Le Frog (cnstrct)
data
eye 6
favorite 0
comment 0
My version of the Ikea lack enclosure design. This version has more vertical space, uses easy replaceble knobs to hang the plexiglass panels instead of magnets, has optional magnets on the bottom parts of the plexiglass, and also looks pretty sweet i think. I use knobs instead because the sheets kept falling of when i moved the enclosure around-since i have wheels on my enclosure. Using knobs means no more falling off, and the bottom magnets means the sheets wont dangle around like a naked dick...
Topics: ikea_lack, Printer_Enclosure, 3d_printer, 3D Printer Accessories, thingiverse, 3D_Printer_Parts,...
3
3.0
Mar 21, 2021
03/21
by
Martynas Gryte (Martinax)
data
eye 3
favorite 0
comment 0
Frame for 3D Printer Frame assembly: https://www.youtube.com/watch?t=93&v=9lqsslsYwdA http://martin53.wixsite.com/3d-printer-x-project/diy Some parts: http://www.ebay.com/itm/3D-Printer-Smooth-Threaded-Rods-Nuts-Washers-for-Prusa-i3-i3-Rework-M8-M10-/321896729591
Topics: stl, 3D_printer_accessories, 3D Printer Parts, frame, Printer_frame, prusa_i3, 3D_Printer,...
6
6.0
Jan 20, 2021
01/21
by
shashank kapoor (Shashank_kapoor)
data
eye 6
favorite 0
comment 0
Micromake Delta printer Accessories for getting extruder printer Motor into it's center position of the delta printer.
Topics: printer mechanics, delta printer, micromake_d1, 3D Printer Accessories, thingiverse, 3D printer,...
9
9.0
Jan 16, 2021
01/21
by
Scott E. Willson (boweeble)
data
eye 9
favorite 0
comment 0
Creator3DR Build Log, Details, Specs, Latest Files, etc: http://swp-llc.com/Creator3DR/ Specs Build Volume: 160 x90 x200 mm (WXLXH) Light Source: 120W LED Array Runs nanoDLP with touchscreen on a RaspberryPi 3 model B Estimated print time per layer: < 2 seconds Changes 10/20/2017 - Added 60mm Case fan cutouts and corrected overall height by 3.175mm to rear shell (Upper_Back_Shell.dxf) - Adjusted dimensions on lower shell to correct size (Lower_Shell.dxf) - Updated the All_Cut_Parts.dxf to...
Topics: SLA_Printer, 3D Printers, 3d_printer, LCD SLA Printer, stl, UV Resin, thingiverse, UV Printer,...
8
8.0
Apr 27, 2021
04/21
by
Andrey Ko (andyhomes)
data
eye 8
favorite 0
comment 0
There was an idea (back to August 2014) to create a delta machine that's very easy to build in home conditions. I didn't like to get a kit with printed or machined parts, but instead, to make it of plywood and then evolve it to something reliable and precise using RepRap features of the technology. So, this is 1st of N series of publications about evolution of my printer. There is nothing to print in this thing. Just laser-cut plane and some notes. Next steps: [RR-Evo Delta 3D Printer - [E2]...
Topics: delta, delta_printer, thingiverse, 3d_printer, 3D Printers, stl, printer_parts, delta_3D_printer
4
4.0
Mar 26, 2021
03/21
by
Laser Weld Design (ReliaBuild3D)
data
eye 4
favorite 0
comment 0
This is an upgrade to our ReliaBuild Printer line which will enclose your open-frame printer! Not only will this enable you to print hi-temp filaments (e.g. ABS, PETG) with less worry, but it will deter unwarranted hands from the printer as well. We're looking at you, middle school students ;)
Topics: stl, Printer_shell_clips, 3d_printer_enclosure, thingiverse, 3D_Printer_Parts, 3D Printer...
4
4.0
Mar 3, 2021
03/21
by
Michael Lange (lange23)
data
eye 4
favorite 0
comment 0
My little *lowcost* Printer Cabinet: Needed some parts: Some little woodscrews cable duct Waveshare 10 inch Display USB or IP Cams Powerfull Server for viratalization of individual printers and camera servers 4-8GB Ram 500GB HD I3 or higher (like xeon) Usb extensions 1,5m , HDMI cable step down 12 to 5 volt 3A 2x for lighting and control stepdown 12 to 5 volt 5A Display Cable 10 meter 2x 0,35mm (various) Cable 5 meter 2x 1,5mm (12v supply line printer) Cable 5 meter 6x 0,5mm (sonoff button) 3x...
Topics: 3D Printer Accessories, thingiverse, printer_case, stl, printer_cabinet
3
3.0
Mar 13, 2021
03/21
by
Maker Guy (maker__guy)
data
eye 3
favorite 0
comment 0
I'm always looking for better ways to utilize space. I always like to keep an extra ream of paper on-hand so I don't run out, but also because my daughter is always hunting paper to draw or write on. These little printer blocks are meant to elevate your printer from whatever surface it's sitting on, and give you a little space underneath to store a ream of paper! ------ I printed in PLA, .3mm layer height.
Topics: thingiverse, printer, printer stand, block, Office, printer pedestal, stl
4
4.0
Apr 1, 2021
04/21
by
Mark Edmondson (mdedm)
data
eye 4
favorite 0
comment 0
Front door latch (holds the front door closed) for a HP 3500 laserjet printer. It's not an exact replica - I've beefed it up in a couple of areas for extra strength.
Topics: printer latch, thingiverse, laser printer, latch, Other, printer parts, printer, stl
8
8.0
Jan 11, 2021
01/21
by
(gmh39)
data
eye 8
favorite 0
comment 0
Combined the "Kossel XL Protection" and "kossel 2020 brace" for someone in the FLSUN Facebook group and figured I'd share it here for everyone to use. I don't own a delta, so I included the Solidworks (Parasolid) and STEP files if anything needs to be adjusted. Happy Printing!!!
Topics: 3d_printer, thingiverse, 3D_Printer_Parts, stl, 3D Printer Parts, kossel, delta, delta_3D_printer
4
4.0
Apr 20, 2021
04/21
by
Ernest Lin (Ernest1122)
data
eye 4
favorite 0
comment 0
SecKit SK-300 is an all-metal Core-XY 3D printer frame kit designed for multi-material, rigidity, easy and minimal maintenance. Frame: 3030 aluminum extrusion 304 steel Y plate Aluminum stepper mount, pulley mount Motion: HIWIN MGN12h and linear rails (preload class z0) MKS Servo42 as alpha/beta steppers 10mm belt with belt tensioner at stepper mount F608ZZ/F6902ZZ as pulleys Extruder: Titan Aqua water-cooling extruder Bed: MIC-6 Tooling plate with borosilicate glass 3-point level adjustment...
Topics: thingiverse, 3d_printer, 3D Printer Parts, stl, CoreXY_Printer, corexy, seckit, 3D_Printer_Parts,...
7
7.0
Jan 17, 2021
01/21
by
Ioannis Nousias (Ioanni)
data
eye 7
favorite 0
comment 0
A fully functional Cartesian 3D printer designed entirely in OpenSCAD. Based on the Marlin firmware, with auto-bed-leveling enabled. STL files need some sanitizing. OpenSCADs included ("Cubic-10mm.zip"). It's a bit of a mess, but I hope usable. There is some degree of parameterization, such as changing the printer dimensions etc. If you need assistance building one yourself, feel free to post a comment, I'll guide you through. Includes a modified version of this spool holder:...
Topics: printer, 3D Printers, 3d_printer, openscad, thingiverse, 3D_Printer_Parts, 3dprinter,...
8
8.0
Mar 10, 2021
03/21
by
Andrey Ko (andyhomes)
data
eye 8
favorite 0
comment 0
This is next step of RR-EVO's evolution. Moving plywood parts replaced with 3d-printed. Previous step: [RR-Evo Delta 3D Printer - [E1] plywood version](http://www.thingiverse.com/thing:1783743) Next steps: [RR-Evo Delta 3D Printer - [E3] hot-end mount](http://www.thingiverse.com/thing:1815271)
Topics: 3d_printer, stl, thingiverse, printer_parts, 3D Printers, delta, delta_3D_printer, rostock,...
2
2.0
Mar 31, 2021
03/21
by
Practical Prints (PracticalPrints)
data
eye 2
favorite 0
comment 0
This is a 'remix' of some of the Prusa Mini parts to match what I had at the time, I have mostly modified parts from the original prusa mini (https://github.com/prusa3d/Original-Prusa-MINI) - full credit goes to the team at prusa for making such a nice design. The things I changed were as follows: - Added 8mm holes in everything that joins to the 3030 (I have Rexroth 3030, not OpenBeam), that's the front and rear Y plates as well as the top and bottom Z ones. I also had a print failure on the...
Topics: thingiverse, 3D Printer Parts, printer parts, printer mods, prusa, mini, 3d printer, prusa mini, stl
8
8.0
Jan 10, 2021
01/21
by
Robby Candra (robbycandra)
data
eye 8
favorite 0
comment 0
This is Wind Shield Holder (type B) for 2020 alumunium frame. Wind Shield is usefull for printing ABS to maiintain temperatur, It also usefull to maintain hot bed temperatur. We can use cartoon or acrilic for shield. Becarefull if you place your board under hotbed. It can be too hot. Place a divider between hotbed and board. Add fan. Check my other wind shield holder type http://www.thingiverse.com/thing:2133367
Topics: thingiverse, 3D_Printer_Parts, stl, 3D Printer Accessories, delta_printer, temperature_enclosure,...
7
7.0
Jan 18, 2021
01/21
by
Jochen Ritter (Haegar333)
data
eye 7
favorite 0
comment 0
Hello, i didn´t like how the cables running besides the extruder were hanging and rubbing everywhere, so i designed this small part to catch them with a ziptie. Now the cables/wires run clearly outside of the frame. Use a Allen Bolt M3x40 mm shortened to 37 mm, but please test for your printer Mount at one corner of the extruder stepper and replace the original bolt with the new bolt.
Topics: 3D Printer Parts, 3d_printer, thingiverse, 3D_Printer_Parts, 3d_printer_tuning, tevo_tornado, stl
8
8.0
Jan 9, 2021
01/21
by
Pedro Stolzenbach (peslatino)
data
eye 8
favorite 0
comment 0
Para utilizar con Tuerca 8mm y espacio salida de tornillo de 3mm.
Topics: 3d_printer, thingiverse, 3D_Printer_Parts, stl, 3D Printer Accessories
1
1.0
Jan 18, 2022
01/22
by
Spinworld Worldspin (BRBullet)
data
eye 1
favorite 0
comment 0
These are higher and more dampening feet then the original, simple, hard rubber feet. I designed it and used it with satisfaction on my Creality Ender 3 V2. They absorbe the X and y action (which creates the most thumping movement sound) -The height allows for better airflow underneath the printer. -The balls allow for better sound dampening. The absorbtion of vibration is much better then the original. Print advice: Material: Holder = ABS/ASA (otherwise PETG) ball ''eye'' = TPU or other...
Topics: 3D_printer_legs, thingiverse, printer_feet, stl, 3D Printer Parts
8
8.0
Apr 23, 2021
04/21
by
Walter Grow (waltergr)
data
eye 8
favorite 0
comment 0
I purchased the StrongFinish Thermal Glass and did not like the idea of using binder clips to hold the glass in place. The corner holds the glass on the outside and is lower than the glass surface.
Topics: 3D_Printer_Parts, 3D Printer Parts, stl, 3d_printer, thingiverse
10
10.0
texts
eye 10
favorite 0
comment 0
Topics: manualslib, manuals, Lexmark printer user manual, Lexmark Manuals Printer printer
Printer Software
Topics: printer software, printer, installation software
8
8.0
Jul 5, 2021
07/21
by
Canon
software
eye 8
favorite 0
comment 0
Version 1.2 Included drivers, manual, and application software for the Canon Pixma iP100 series printer. QH74739 QH-4739-01
Topics: Canon, Printer, Drivers, Printer Drivers, Canon Pixma Printer, iP100
8
8.0
Apr 23, 2021
04/21
by
Michael (Useful)
data
eye 8
favorite 0
comment 0
The original printbed of the ctc printers isn `t very stiff, so it bends during the leveling process. Thats why I decided to design my own printbed. Its out of Aluminium L-profiles so you can easily rebuild it. It should also work with flashforge printers I think. My printbed is: - more stiff then the original - more exact - easy to rebuild What do you need: - Aluminium L-profile 40x20x2mm, 1500mm long - Aluminium L-profile 25x15x2mm, 130mm long - 4 x LM8UU linear bearing - stand drill - 4mm,...
Topics: 3D_Printer_Parts, printbed, printer, flashforge, CTC_3D_Printer, 3D Printer Parts, CTC,...
4
4.0
Mar 17, 2021
03/21
by
Anthony Mink (home234543)
data
eye 4
favorite 0
comment 0
This is the bottom corner bracket that I made for a delta 3d printer. The vertical beam is a 2040 aluminum extrusion and the horizontals are 2060 aluminum extrusion. I have included the FreeCad 0.17 file so that anyone can make changes/modifications.
Topics: kossel, thingiverse, delta_3D_printer, 3D_Printer_Parts, 3D Printer Parts, delta_printer, stl,...
9
9.0
Apr 29, 2021
04/21
by
Tomasz Milcewicz (tomil1)
data
eye 9
favorite 0
comment 0
Two version of funduct. One with mount for 3mm led and cable holder and second funduct without.
Topics: stl, 3D_Printer_Parts, fanduct, 3d_printer, 3D Printer Parts, thingiverse
3
3.0
Apr 20, 2021
04/21
by
Mr. DIY3DTech Dot Com (DIY3DTech)
data
eye 3
favorite 0
comment 0
I found when changing spool types on my BQIU Magician Lipstick Delta 3D Printer (see more here: https://amzn.to/2ILKYvQ ) they would not fit because of a post on the stock spool holder so instead of crudely sawing off the unnecessary appendage I decided to take the high road and simply design a new on in Fusion 360! This version uses a top and bottom cinch with 608zz skate bearing (see more here: https://amzn.to/2DoivsA) with a newly designed spool wheel with a much smarter look! **Worth...
Topics: thingiverse, 3D Printer Parts, stl, delta_printer, delta, delta_3D_printer